Breeze Pearl
Breeze decorative mortar the yarn effect has a decorative coating that can create a variety of decorative surfaces installation depending on the technology.
seamless, durable and stylish decorative coating;
effortless end result easy due to application and rapid drying.
Applications: Indoors in rooms with normal load. Suitable for use on prefabricated mineral substrates (concrete, cement and gypsum board) as well as chipboard.
Platform preparation:
1. To be installed the surface must be clean, dry, solid and white. Old coatings, dirt, dust, chalky substrates (liming, lime) must be cleaned mechanically. Glossy surfaces (old oil paint and enamel) must be roughened with sandpaper and then cleaned dust. Fill cracks, cavities and unevenness.
Attention. BREEZE is a thin layer of decorative coating, so it does not completely cover the unevenness of the base!
2. Treat the base with SILK PLASTER Primer, it will make it easier later application of the decorative coating as it contains roughening agent. Allow to dry as instructed.
Material preparation:
3. Mix the mortar thoroughly with a drill whisk at low speed.
4. Apply the BREEZE decorative coating with a plastic spatula. Application is done with light leveling movements without pressure. When applying, it is necessary to clean the child to remove excess material.
The smoothing direction of the material affects the final appearance of the material.
When applying, it is necessary to observe the evenness and thickness of the layer over the entire surface, avoiding the presence of streaks and crevices. The thickness of the layer can be up to 0.5 mm.
6. Decorative material BREEZE must be applied at a time from corner to corner.
Always work on the "wet" edge, don't allow the material to dry, so that no seams remain on the surface.
Tool: Plastic spatula
Coating drying time: 3 hours, touch resistant At 20 ° C and 60% in relative terms in humidity. Complete drying - 24 hours. Final strength: 5-7 days.
Consumption, m² / kg: ~ 2.5 - 3 m² / 1 kg; depends on the platform and installation thickness.
Operating conditions: Operating temperature (air, base, materials) +5 - + 35 ° С. Relative humidity of the air up to 65%.
Composition: Acrylic copolymer dispersion, water, decorative fillers, process agents, formaldehyde-free preservatives.
Duration: unopened in original packaging - 24 months.
Security measures: The material is fire and explosion proof. Avoid contact with skin and eye protection. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. The use of gloves and protective clothing is recommended.
Transport and storage: Store in a cool, dry place, out of reach of children, tightly closed. Transport and storage temperature is + 5 ° С - + 35 ° С.
Up to five cycles of freezing and thawing the material (cycle - up to 1 day) are allowed at -30 ° C or one freezing at -30 ° C, but for a maximum of 14 days. Defrosting must be carried out without heating devices. Stir well after thawing.
Disposal: Dispose of empty containers as household waste in accordance with local regulations.
Recommendations:
! Before applying the BREEZE decorative coating, check that the color of the material corresponds to the ordered one.
Important! Perform a test paint on the surface where the material application work will be continued.
The material may differ slightly from one sample to another and from one batch to another. It is recommended to mix the materials of different batches.
Neither the manufacturer nor his authorized representative shall be liable for any loss resulting from the misuse of its materials.